Introduction
The SparkFun Temperature Sensor - STTS22H (Qwiic) and the SparkFun Micro Temperature Sensor - STTS22H (Qwiic) are Qwiic enabled breakout boards based on the ultralow-power, high-accuracy, digital temperature sensor STTS22H from ST Microelectronics. Thanks to its factory calibration the STTS22H offers high-end accuracy performance over the entire operating temperature range, reaching as low as ±0.5 °C without requiring any further calibration at the application level.
SparkFun Temperature Sensor - STTS22H (Qwiic) | SparkFun Micro Temperature Sensor - STTS22H (Qwiic) |
Required Materials
To follow along with this tutorial, you will need the following materials. You may not need everything though depending on what you have. Add it to your cart, read through the guide, and adjust the cart as necessary.
SparkFun Temperature Sensor - STTS22H (Qwiic)SEN-21262 |
SparkFun Micro Temperature Sensor - STTS22H (Qwiic)SEN-21273 |
SparkFun RedBoard QwiicDEV-15123 |
USB micro-B Cable - 6 FootCAB-10215 |
Qwiic Cable - 50mmPRT-14426 |
Suggested Reading
If you aren't familiar with the Qwiic system, we recommend reading here for an overview.
If you aren’t familiar with the following concepts, we also recommend checking out a few of these tutorials before continuing.
I2C |
Serial Basic Hookup Guide |
RedBoard Hookup Guide |