7 — Qwiic Alphanumeric Display

This example shows how to read the BMV080 via Qwiic when the sensor is configured in duty cycle mode and outputs the readings to display them on a Qwiic Alphanumeric display connected over a Qwiic daisy-chain. You'll need a Qwii Alphanumeric Display to run this example.

Head to the example 7 from the Arduino IDE's menu (located in File Examples > SparkFun BMV080 Arduino Library > Example_07_Demo_Alphanumeric).

If you have not already, select your Board and associated COM port. Upload the code to the board and set the Arduino Serial Monitor to 115200 baud. The Arduino should begin outputting the sensor readings through the Arduino Serial Monitor and the Qwiic Alphanumeric display. For simplicity, we will only display PM2.5.