Resources
Product Resources
- Product Page
-
Design Files:
-
All Files
-
Connector Board
-
Display Board
-
Main Board
-
-
Component Documentation
-
mosaic-X5
mosaic-X5 Firmware
Beginning with firmware
v4.16.0+, Septentrio's firmware will prevent users from downgrading to earlier versions for security reasons. This is to comply with the European Radio Equipment Directive-Delegated Regulation (EU) 2022/30 (RED-DA), effective as of Aug 1st 2025, installation of the firmware will limit downgrade capability. For more details, please refer to the following articles:Warning
Beginning with firmware
v4.15.0+, Septentrio has introduced a mandatory user login requirement to comply with the EU Radio Equipment Directive (RED) 2014/53/EU, specifically Article 3(3) (d), (e) and (f) regulations. This update has been gradually applied to all receivers leaving production (beginning August 1, 2025). For more details, please refer to the following articles: -
ESP32-WROVER-E
-
Miscellaneous
-
- Firmware Repository
- SFE Product Showcase
Additional Resources
🏭 Manufacturer's Resources
-
Septentrio also provides great resources for the mosaic-X5:
- mosaic-X5 Product Page
- Support Portal:
- Septentrio Knowledge Base (1)
- Learn More
- Webinars
- Technical Papers
- Insights (Case Studies and Technical Articles)
- Community
- Agnostic Corrections Program
- GitHub:
- YouTube Channel (2)
- JammerTest 2023 - Anti-Jamming and Anti-Spoofing Performance
-
Recommended Articles
General Knowledge
mosaic - Getting started
Resetting a receiver
Resetting and clearing the non-volatile memory
Generating a diagnostic report of a Septentrio receiver
RTCMv3 messages supported by the Septentrio receivers
Interference Detection, Mitigation, and FlaggingProviding Corrections
How to set up a base station
RTK positioning with a moving baseline
Set up an (internal) NTRIP caster on a Septentrio receiverApplying Corrections
Receive corrections over IP
Receive corrections via NTRIP
Using uBlox's correction services for precise positioningAntenna Corrections
-
Recommended Videos
Getting started with the mosaic receiver module
Output NMEA data on the mosaic receiver module
Receiving NTRIP corrections on the mosaic module
Logging data to the Septentrio mosaic receiver module
Receiving corrections over an IP connection
Share the USB internet connection on your receiver
Septentrio's Agnostic GNSS Corrections program
Test-run for Septentrio's anti-jamming feature
mosaic - GNSS module receiver range from Septentrio
-
Espressif also provides great resources for their ESP32 module:
- ESP32 Product Resource Page
- Espressif's Forum for the ESP32
- Espressif GitHub Repositories
- ESP32 Arduino Core
.jsonfile needed for Epressif's ESP32 Arduino Core:
https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
- ESP-IDF -- IoT Development Framework
- ESP32 Arduino Core